Read this manual before you use this Nailer. Follow all safety warnings and instructions. If you are uncertain about the operation of the Nailer, call
Seal Placement106TO CLEAR A NAIL JAM (continued):3. Separate the Foot and gate with a screw driver just enough to clear out the jammed nail.4. Put thr
9476787972737183898692938794717550588288848191545611SCHEMATIC - Model 445 POWER ROLLERFLEX Power Roller Conversion Parts.For Step-by-Step Videos and I
POWERCLEATS LENGTH DETERMINATION CHARTThis chart will assist you in determining the proper length of Powercleats to use for various thicknesses of oo
13PROBLEM POSSIBLE CAUSE SOLUTION1Driving blade does not retract1. Zero or Low air pressureCheck air supply for 70 psi minimum to 110 psi maximum2. La
2Always wear approved front and side EYE PROTECTION when operating this Nailer. Others in the work area should also wear front and side EYE PROTECTION
ADAPTER FOOT LOCATING EAR3FLEX Foot Adjustment:Wood varies from one manufacturer to the next. The different wood proles may be due to height and len
4WARNINGWhenever air is connected to the Nailer, keep body parts away from the nail discharge path. Disconnect the air line before making adjustments
5For Step-by-Step Videos and Instructions, Visit our Web Site at www.Powernail.comPARTS & SERVICE: When ordering parts include the part number, p
6DRIVING BLADE ASSEMBLY REMOVAL: 1. Disconnect the air supply. 2. Remove Rubber Plunger Cap (#18). 3. Unscrew & remove Body Cap (#2). 4. Push Safe
For Step-by-Step Videos and Instructions, Visit our Web Site at www.Powernail.com7Piston Rod U-Cup Lip Seal (#24): 1. Remove the old U-Cup Lip Seal f
KEY: S=Sold Separately, A= Sold as part of assembly, F=Factory replacement only, K=Sold as part of a KitMODELS 445 POWER ROLLER PARTS LISTITEM PART NO
For this parts list and other Powernailer schematics, please visit the Powernail Parts Store at http://www.powernail.comModel 445 Power Roller Assemb
Comments to this Manuals